This new Converter transform analog sensor data from Gobius, Gobius Pro and Gobius C and other indicators into NMEA2000 data. The converter can also be used for: motor data, pressure or temperature data from existing sensors into NMEA2000 networks. You can connect up to 4 channels (tanks).
Specifications:
- Input signals: 0-190 Ohm, 240-33 Ohm, Self-defined (0-999 Ohm)
- Dimension: 90 x 40 x 25 mm
- Weight: 115 g
- Cable lenght: 1 meter
- Protection Rating: IP67
- Signal Output: NMEA 2000/J1939 Network Messages
- Operating Voltage: 9~16V
- Connector: Male “Micro-C” Pinout
- Operation Temperature: -40°F ~ +185°F(-40°C~+85°C)
- Power consumption: <50mA
- Connect the Converter direct to Gobius products
- Connect the Converter via the HUB to Gobius Pro sensors
- Instructions for connecting Gobius and Gobius Pro included
Can also be downloaded at Gobius Pro - Can also be downloaded at Gobius C
- Manfacturer: KUS, China
| Poids | 0.150 kg |
|---|
Produits similaires
Gobius
CHF 357.50 TVA incl.
Gobius Pro with 2 sensors
Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.
CHF 219.90 TVA incl.
Gobius 1, low level tank alarm for water/fuel and fluid tanks
Complete level switch for water, fuel and fluid tanks.
CHF 357.00 TVA incl.
Gobius 4 for water/fuel- & fluid tanks
Complete tank monitor system for water, fuel and other fluids.
Gobius
CHF 112.00 TVA incl.
Hub for Gobius Pro sensors
Out signals: 10-180 Ohm and 240-33 Ohm.
CHF 342.50 TVA incl.
Gobius C, stepless measurement, 0-100%, Version 3.0
Gobius
CHF 56.00 TVA incl.
NEW Gobius panel (PIR)
Smart overfill alarm panel with built-in motion sensor (PIR). Starts Gobius when you visit the toilet and switches off automatically after 60 seconds. Alarms when the waste tank is full.
Gobius
CHF 180.95 TVA incl.
Gobius Pro with 1 sensor
Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.
